Another Analogue Input Problem (Sorry) Omron CX-Programmer

mamentozz · Feb 12, 2014

sovad said:
I got it working. I'm not sure exactly what it was but I re did everything from scratch and it starting working (yes!). One thing I did notice though was that the MOV function does not work how I thought. I thought it moved and stored a word in a particular location in memory until told otherwise but instead it only moves the location. I think this can be changed by putting an @ symbol in front of it but it was just something I noticed.

Thank you for your time everyone, it's good knowing I have some back up.

hi your problem is same with me, can you give suggestion to solve it. the indicator light is not active too,

Lancie1 · Feb 12, 2014

hi your problem is same with me, can you give suggestion to solve it. the indicator light is not active too,

See Woody's Post #14. I think you need to do something similar to make your analog inputs work.

mamentozz · Feb 12, 2014

i dont get it what does it means in #14, the problem is cant monitoring the input range always 0000,this is the same problem like me, maybe i will check the wiring and the program again,

mamentozz · Feb 13, 2014

i know the problem , because when i wanted transfer, i forgot to checklist the setting transfer thats why the analog didnt respon

b4umusic · Mar 9, 2015

As this post is old If anyone still wants solution than please post and I will reply correct solution

Another Analogue Input Problem (Sorry) Omron CX-Programmer

mamentozz

Member

Lancie1

Lifetime Supporting Member

mamentozz

Member

mamentozz

Member

b4umusic

Member

Similar Topics