Hi,
I have a TWIDO TWDLCAA16DRF PLC that blinks its RUN led but doesn't startup. I have TwidoSuite 2.2 installed and I received a cable from a collegue with a TSXCUSB232 converter. For connection between USB/PC and the TWIDO, schneider advices to use a TSXCUSB485D converter.
However I have found that the TSXCUSB232 should work as well.
A Twido has both electrical interfaces, RS485 and RS232.
So the RS232 converter should work.
Weird part about the cable I got is that is does not fit the PLC connection:
View attachment topje.jpg
It has some kind of black pin...
It should be a cable like this:
View attachment scherm kabel.jpg
This is the PLC side:
View attachment plc.jpg
I could build an own cable... or should I be better of by buying the cables
TSXCUSB485D+TSXCRJMD25 ...
What do you guys think ?
Anyone had troubles with this communication as well ?
Thanks,
Kind regards,
G
I have a TWIDO TWDLCAA16DRF PLC that blinks its RUN led but doesn't startup. I have TwidoSuite 2.2 installed and I received a cable from a collegue with a TSXCUSB232 converter. For connection between USB/PC and the TWIDO, schneider advices to use a TSXCUSB485D converter.
However I have found that the TSXCUSB232 should work as well.
A Twido has both electrical interfaces, RS485 and RS232.
So the RS232 converter should work.
Weird part about the cable I got is that is does not fit the PLC connection:
View attachment topje.jpg
It has some kind of black pin...
It should be a cable like this:
View attachment scherm kabel.jpg
This is the PLC side:
View attachment plc.jpg
I could build an own cable... or should I be better of by buying the cables
TSXCUSB485D+TSXCRJMD25 ...
What do you guys think ?
Anyone had troubles with this communication as well ?
Thanks,
Kind regards,
G