PSDirect and Vijeo Citect

Claptrap

Member
C
Join Date
May 2012
Location
Barcelona
Posts
1
Hi;

In my final-year project I need comunicate Vijeo Citect with a S7-200 PLC through PSDirect, but I don't know how configure Vijeo Citect to comunicate with PSDirect.

How indicate to Vijeo Citect to find PSDirect? And variable's tags how put in PSDirect and Vijeo Citect? What steps I must follow? Any document explains this?

Sorry for my very bad english, but really I need help. Thanks a lot.
 

Similar Topics

W
Citect to VIPA via PSDirect
Hi All, Has anyone had success with a VIPA PLC talking to Citect using PSDirect Driver over Ethernet? The current situation is Citect V7.1...
Replies
6
Views
4,136
woolie161
W
R
vijeo citect scada
Hello, the system we use is Scada 7.5 series. We have usb key activ now we need additional key to make the system work, how do we solve this...
Replies
0
Views
68
Rashka
R
M
Vijeo designer 6.2
Good Day all. I am currently busy with a schneider HMI design in vijeo designer and i want to know how you can animate an image to move on the x...
Replies
2
Views
214
mr.qrsa
M
A
Vijeo Designer Acknowledge Alarms
Hello, I have been tasked with adding some analog signals for display and alarm setup in some old Schneider Electric HMIGTO HMI-panels. I have...
Replies
4
Views
206
ahorsenamedhorse
A
A
Function for data enter and out Vijeo Citect 7.4
My system are taking data from RHT sensors, around 45 points. Now I want to make a function in which, if the data is #BAD or 0 in values for all...
Replies
0
Views
490
Aimin Ariff
A
Back
Top Bottom