AutomationTechBrian
Lifetime Supporting Member
Another customer called today to help them troubleshoot thier Ferry Rotomold machine. This is good because it's giving me an opportunity to build my Profacy ME skills. I still find it hard to get the answers to some basic questions, though. And with the holiday week, tech support was under-staffed today... there was nobody there who could field a 90-30 question.
Easy question for those familiar.... the red X over the target name doesn't go away after uploading the program to the laptop. I believe that is because the PC version does not match the PLC program. I'm trying to use the software to troubleshoot the program, so I need a real-time connection that shows me the state of the bits. Is there a way to overcome this? Is this a case where I need the old VersaPro software? ....I'm just trying to remember the things I've learned so far.
BTW.... CPU 363
Thinking of follow-up questions in advance.... If I do need VersaPro, I'm guessing the only way (if any) is to contact my GE distributor? (Powermation in MPLS/St Paul) Is VersaPro available, even though it's not supported?
Easy question for those familiar.... the red X over the target name doesn't go away after uploading the program to the laptop. I believe that is because the PC version does not match the PLC program. I'm trying to use the software to troubleshoot the program, so I need a real-time connection that shows me the state of the bits. Is there a way to overcome this? Is this a case where I need the old VersaPro software? ....I'm just trying to remember the things I've learned so far.
BTW.... CPU 363
Thinking of follow-up questions in advance.... If I do need VersaPro, I'm guessing the only way (if any) is to contact my GE distributor? (Powermation in MPLS/St Paul) Is VersaPro available, even though it's not supported?