Mohamed El-khateb
Member
hi all
i'm working at controllogix with rsview me using controlnet communication,i have problem for redancy that give me pri and the other indicate disq some times and some times give me right indication for pri&syn that my system node
and if that's enough plaese advice for my problem
i'm working at controllogix with rsview me using controlnet communication,i have problem for redancy that give me pri and the other indicate disq some times and some times give me right indication for pri&syn that my system node
- 1 sync controllogix processor
- 1 pri controllogix processor
- 1 chassis I/O module
- 1 pc for rsview me scada
and if that's enough plaese advice for my problem