greg_schnabel
Member
- Join Date
- Jul 2004
- Posts
- 1
I'm new to the PLC game and I am trying to set up a slc 500 system for my E-bay junkie boss (all my stuff is used and I have no paperwork. I would really appreciate any help that I can get.
1. I have a panel view 1400e and a 1000 standard. Do I need panel view software to run them, and what all do I need to make them operational?
2. I have questions over my programming. I have a 1746 NT4 and am really not sure how to program for my thermocouple functions.
I'm sure there will be a lot more along the way, but for now these are my pressing questions. Thanks a lot,
Greg
1. I have a panel view 1400e and a 1000 standard. Do I need panel view software to run them, and what all do I need to make them operational?
2. I have questions over my programming. I have a 1746 NT4 and am really not sure how to program for my thermocouple functions.
I'm sure there will be a lot more along the way, but for now these are my pressing questions. Thanks a lot,
Greg