Hi there,
I got a headache working with Devicenet network and I finally decided to post my issue.
I have Compactlogix with Devicenet scanner (1769-SDN) in Rack 01 and address 0, baudrate 125kb.
Before connecting any nodes, Rsnetworx shows scanner vert well, but as soon as I connect a node and reset the system, it does not show scanner and only shows node. I have tried several times connecting and disconnecting nodes and also trying different I/O devices as a node, but the same issue.
I installed all EDS files and am using standard round Devicenet cable and terminating resistor (120 ohm) in both ends. I use one resistor in scanner side and another one in node side.
I need your help to figure out what the problem is?
Appreciate you
I got a headache working with Devicenet network and I finally decided to post my issue.
I have Compactlogix with Devicenet scanner (1769-SDN) in Rack 01 and address 0, baudrate 125kb.
Before connecting any nodes, Rsnetworx shows scanner vert well, but as soon as I connect a node and reset the system, it does not show scanner and only shows node. I have tried several times connecting and disconnecting nodes and also trying different I/O devices as a node, but the same issue.
I installed all EDS files and am using standard round Devicenet cable and terminating resistor (120 ohm) in both ends. I use one resistor in scanner side and another one in node side.
I need your help to figure out what the problem is?
Appreciate you