derrickjp7
Member
Anyone know what might cause this?
All my other drives are working fine except this one. Sometimes I can start the drive, it'll run fur 5 seconds then error out. Most the time I'll run a MSO in the Direct Commands and it errors out immediately. All the wiring is fine and I've held a volt meter to the AC and DC inputs to the drive while initiating MSO instructions and there's no drop or interruption to power. Is there some parameter I may have unintentionally changed?
Any help would be greatly appreciated! Of course this has to happen the day before my final capstone presentation. Murphy needs to leave, now. Haha
All my other drives are working fine except this one. Sometimes I can start the drive, it'll run fur 5 seconds then error out. Most the time I'll run a MSO in the Direct Commands and it errors out immediately. All the wiring is fine and I've held a volt meter to the AC and DC inputs to the drive while initiating MSO instructions and there's no drop or interruption to power. Is there some parameter I may have unintentionally changed?
Any help would be greatly appreciated! Of course this has to happen the day before my final capstone presentation. Murphy needs to leave, now. Haha
Last edited: