splendid8877
Member
Hi all,
I'm planning to set a timer that everyday each 1 hour to on pump.
And If the power trip and then to on back the PLC, the plc still continue to counting.
For example:
I)7pm pump on
II)after 1 hour is 8pm pump on again
III)during 8.35pm power trip
IV)soon after 8.40pm power on back PLC
V)then 9pm pump on neither 9.05pm or 9.40pm pump on
Is it possible to write this program in delta PLC?
Thanks in advance,
Ct
I'm planning to set a timer that everyday each 1 hour to on pump.
And If the power trip and then to on back the PLC, the plc still continue to counting.
For example:
I)7pm pump on
II)after 1 hour is 8pm pump on again
III)during 8.35pm power trip
IV)soon after 8.40pm power on back PLC
V)then 9pm pump on neither 9.05pm or 9.40pm pump on
Is it possible to write this program in delta PLC?
Thanks in advance,
Ct
Last edited: