RMA
Member
Does anybody know if the following was normal practice in Step5. This FC handles the (90°) "corners" of the production line conveyor system. It is called from an FB which runs autonomously on the same PLC in which I've had to add fairly substantial program modifications. The whole FC looks as though it was copied unchanged from an original Step5 version of the program, but it raises the question of whether you could do this safely in Step5.
I certainly don't like seeing it in a Step7 program and I'll be moving the HIME variable to a marker word anyway, but I'd be grateful for any comments - especially about the Step5 aspect.
I certainly don't like seeing it in a Step7 program and I'll be moving the HIME variable to a marker word anyway, but I'd be grateful for any comments - especially about the Step5 aspect.