jdbrandt
Lifetime Supporting Member
The attached photo was sent to my by a friend, who was passing through an (unnamed) Asian country.
Price: 5USD
Price: 5USD
OT: Why software is so expensive
- Thread starter jdbrandt
- Start date
seaston_65
Member
hahaha,
What are the odds of it actually working?
What are the odds of it actually working?
Operaghost
Member
What are the odds it is a legal version?
bernie_carlton
Lifetime Supporting Member + Moderator
seaston_65 - 10% - may have cracked activation
Operaghost - 0%
Operaghost - 0%
JRW
Member
The same odds that the Rolex watch (not shown)
on the left side is real.
on the left side is real.
Similar Topics
I want to buy used/inexpensive (under $500) PLC hardware and software for personal use/testing. Can any of you suggest the best way to go about...
Good Morning ,
I am looking for some inexpensive and easy to use schematic software. I am sure that many of you have used various software...
A good and non expensive HMI/SCADA software you recommend? RSView32 Cimplicity are very good but its cost is very high.
Regards
Juan Velasquez
I am using Factory Talk view Machine Edition Runtime HMI. I want to configure on button in such way that when i press this button I want to...
Hi!
So my problem is a little funky, I had Studio 5000 v 24 and 30 installed, but forgot to install RSLogix (which I cannot go without). Is there...