jdbrandt
Lifetime Supporting Member
The attached photo was sent to my by a friend, who was passing through an (unnamed) Asian country.
Price: 5USD
Price: 5USD
OT: Why software is so expensive
- Thread starter jdbrandt
- Start date
seaston_65
Member
hahaha,
What are the odds of it actually working?
What are the odds of it actually working?
Operaghost
Member
What are the odds it is a legal version?
bernie_carlton
Lifetime Supporting Member + Moderator
seaston_65 - 10% - may have cracked activation
Operaghost - 0%
Operaghost - 0%
JRW
Member
The same odds that the Rolex watch (not shown)
on the left side is real.
on the left side is real.
Similar Topics
I want to buy used/inexpensive (under $500) PLC hardware and software for personal use/testing. Can any of you suggest the best way to go about...
Good Morning ,
I am looking for some inexpensive and easy to use schematic software. I am sure that many of you have used various software...
A good and non expensive HMI/SCADA software you recommend? RSView32 Cimplicity are very good but its cost is very high.
Regards
Juan Velasquez
HelloI need software to download the program from PLC EH-A28DRP from an old machine whose manufacturer does not exist. It may be Ladder Editor for...
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...