You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Thread Tools Display Modes
Old August 16th, 2015, 08:27 PM   #1
United States

Skolnik is offline
Join Date: Aug 2015
Location: Chicago
Posts: 1
Question Ab kinetix 300 i/o expansion block required USER MANUAL INCORRECT??

Hi folks, I've been having a problem enabling my Kinetix 300 over E/IP. 1stime Kinetix/EIP user here. A few questions Im hoping to find aswers too.. Any help is appreciated

Project Components:

Servo Drive ------- Kinetix300 E/IP
PLC ---------------- Micro850
Software ----------- Connected Components Workbench

I've connected to the drive over E/IP; have modified parameters in motionview, checkphasing runs fine; Digital IO>enable... (all from the manual)

...and the drive will not enable. Shunt in not wired; is this required?

So I found one thread and one written document stating that the i/o expansion block IS required in order to use EIP communication?

Link 1

Link 2

Any Advice on how create the worlds simplest program in CCW in order to write messages in to the Drive using EIP.


Last edited by Skolnik; August 16th, 2015 at 09:20 PM.
  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Connecting FC 105 block with I/O Field in Wincc V5.0 gigacer LIVE PLC Questions And Answers 8 October 21st, 2014 02:29 AM
MicroLogix1400 expansion I/O Steve Bailey LIVE PLC Questions And Answers 7 May 28th, 2014 08:26 PM
Boiler Blowdown via Micrologix1100 with Analog I/O Expansion blue5t1050 LIVE PLC Questions And Answers 1 April 11th, 2013 01:04 AM
1791 Block I/O to Controllogix? Paul351W LIVE PLC Questions And Answers 0 October 28th, 2011 02:00 PM
Kinetix 300 versus Ultra 3000 Switek LIVE PLC Questions And Answers 0 July 19th, 2011 04:28 AM

All times are GMT -5. The time now is 09:23 PM.