1746-HSCE2 setup

JamesWSY

Member
J
Join Date
Jul 2005
Location
Jakarta
Posts
81
Hi...
I have to used 1746-HSCE2 that connected to two encoders: 2048 PPR encoder that connected to Channel 0 and assign for length measurement (in mm), and another 1024 PPR encoder connected to channel 1 and used to indicate rotary knife edge position ( 0 - 360 deg). How to configure the 1746-HSCE2 for above requirement? Any idea?
Thanks.
James
 

Similar Topics

N
1746-hsce2
Hi all I need your help, I have a 1746-HSCE2 card configured, the pulses read perfectly, but I have a problem as I use the pulse counters in...
Replies
8
Views
2,182
JaxGTO
JaxGTO
N
AB1746-hsce2 testing
Hi everyone. It's been a long time since I have asked for your help but I have been given a heap of plcs cards that have been changed out that...
Replies
0
Views
1,216
nathan.slade
N
K
1746-hsce2 card isn't initializing
hi everyone. i have 1746-hsce2 card (class 4) that i cannot get initialized. it returns a programming error each time the counter config block...
Replies
2
Views
1,807
Burton
B
T
about 1746-HSCE2
I'm a beginner of PLC. Now I have a question. how the high speed counter working in PLC program? I saw some example code. when the program...
Replies
3
Views
1,940
tang6518
T
bop
Ab 1746-hsce to 1746hsce2
Good day to all. Our machine just got broken due to damage HSCE module There are no available parts for one week. Could i use the HSCE2 allen...
Replies
1
Views
2,353
fuzzy logic
fuzzy logic
Back
Top Bottom