This is the start of one of the four Basic module programs as saved 10/14/03. Even if it was written in PBASE I should still be able to list it on the terminal?
1 REM LOGOMAT S.r.l.
2 REM Via V.Bellini n.6 Bologna Italia
3 REM Tel.+39-(0)51-6260070
4 REM Equipement title: Basic Chart 1747-BAS
5 REM Application software title: 1747-PBASE
6 REM Application software version: 2.00
7 REM Program file name: 1O6_101.txt
8 REM Program version: 1.01
9 REM Software Language: Intel Basic 52
10 REM Software Author: Gualandi M.
11 REM Date: 07/10/1999
12 REM*************************************************************
15 REM Pc programming port parameter (PRT1)
20 REM*************************************************************
25 MODE (PRT1,19200,N,8,,,)
30 REM*************************************************************
35 REM MARKEM comunication parameter (PRT2)
40 REM*************************************************************
45 MODE (PRT2,4800,N,8,1,,)
50 REM*************************************************************
55 REM "MARKEM 3 LENGTH OF STRINGS (AST./CODE 128 SIDE)"
60 REM*************************************************************
65 STRING 2600,128 : REM "STRING BUFFER SETUP"
70 DIM Q(3) : DIM V(3) : REM "Q,V ARRAY SET"
75 REM*************************************************************
80 REM Before Running Program wait 4 seconds
85 REM*************************************************************