stretch_af
Member
I have read through this pub: Rockwell Automation Publication 1756-RM010M-EN-P - November 2022
I have questions. The procedure in the pub above is more for updating firmware, not specifically program updates.
We have 2 redundant chassis with L71 processors, running firmware 24.052. EN2TR/C is at 10.007. RM2/A is at 20.007.
What we need to do is perform a download to add a remote I/O rack to the tree.
Is there a way to download the updated program to the secondary?
Then initiate a lock switchover to update the primary?
Or do we need to bite the bullet and take the system down for a few minutes?
Thanks
Justin
I have questions. The procedure in the pub above is more for updating firmware, not specifically program updates.
We have 2 redundant chassis with L71 processors, running firmware 24.052. EN2TR/C is at 10.007. RM2/A is at 20.007.
What we need to do is perform a download to add a remote I/O rack to the tree.
Is there a way to download the updated program to the secondary?
Then initiate a lock switchover to update the primary?
Or do we need to bite the bullet and take the system down for a few minutes?
Thanks
Justin