I'm trying to make connection via 1761 NET-AIC interface converter.
Devices which I want to connect are PLC 1747 L532 SLC 5/03/ and PanelView PLUS 600.
I'm using cable 2711-NC13 between PanelView PLUS 600 and NET-AIC converter.
Between PLC and NET-AIC converter cable is 1761-CBL-AS09.
And from 1761 NET-AIC converter to PC USB to DH485 interface converter with cable 1761-CBL-PM02,SER C
In RS Linx, I configured driver DH485 UIC and I can see PLC and PanelView.
Problem is when I try to make device shortcut in Factory Talk View Studio.
RS Linx Enterprise doesn't see PLC.
I tryed in design(local) to add driver Serial DH485(including 2711P-RN3, 2711P-RN22C) and than pop up window with Serial DH485 Properties.
So I'm able to type Name, Station Number Max.Station Number,Com.Port, Baud.
After that I add SLC DH485 devices 1747-L523,SLC 5/03 Processor.
But after all I don't can see anything on that network, so I am not able to make connection between PanelView and PLC.
Can somebody help me? What I'm doing wrong?
I attached few pictures of hardware.
Devices which I want to connect are PLC 1747 L532 SLC 5/03/ and PanelView PLUS 600.
I'm using cable 2711-NC13 between PanelView PLUS 600 and NET-AIC converter.
Between PLC and NET-AIC converter cable is 1761-CBL-AS09.
And from 1761 NET-AIC converter to PC USB to DH485 interface converter with cable 1761-CBL-PM02,SER C
In RS Linx, I configured driver DH485 UIC and I can see PLC and PanelView.
Problem is when I try to make device shortcut in Factory Talk View Studio.
RS Linx Enterprise doesn't see PLC.
I tryed in design(local) to add driver Serial DH485(including 2711P-RN3, 2711P-RN22C) and than pop up window with Serial DH485 Properties.
So I'm able to type Name, Station Number Max.Station Number,Com.Port, Baud.
After that I add SLC DH485 devices 1747-L523,SLC 5/03 Processor.
But after all I don't can see anything on that network, so I am not able to make connection between PanelView and PLC.
Can somebody help me? What I'm doing wrong?
I attached few pictures of hardware.