Dear,
I have to communicate my SLC 5/04 CPU channel0 ,configured as DH485, i have an ethernet interface 1761 NET ENIW. I have read how to configure this 1761 NET ENIW via PC comm port ,using ENIW configuration utility.
I want to communicate in the following manner
PC ethernet port to ENIW ethernet port using ethernet cross over cable and RS 232 port to SLC channel0(configured as DH485) via a 1761-CBL-PM02 series C cable.
But please tell me if there will b any issue with channel 0 of slc is configured as DH485 and ENIW has rs 232 port.
I have to communicate my SLC 5/04 CPU channel0 ,configured as DH485, i have an ethernet interface 1761 NET ENIW. I have read how to configure this 1761 NET ENIW via PC comm port ,using ENIW configuration utility.
I want to communicate in the following manner
PC ethernet port to ENIW ethernet port using ethernet cross over cable and RS 232 port to SLC channel0(configured as DH485) via a 1761-CBL-PM02 series C cable.
But please tell me if there will b any issue with channel 0 of slc is configured as DH485 and ENIW has rs 232 port.