wilkerson29847
Member
Good morning everyone.
I have a situation that is really stumping me. I have three separate but identical machines, all running 1769-L30ER PLCs, and they completely lose their network settings. None of them have memory cards installed, all three have the setting of "Manually Configure network settings" checked but all three of them will zero out all of the network settings in them. See attached screen shot of one of them. I then have to connect via the USB connection on the front to reset the network settings to what they are supposed to be.
Does anyone have any ideas what could be causing this?
I have a situation that is really stumping me. I have three separate but identical machines, all running 1769-L30ER PLCs, and they completely lose their network settings. None of them have memory cards installed, all three have the setting of "Manually Configure network settings" checked but all three of them will zero out all of the network settings in them. See attached screen shot of one of them. I then have to connect via the USB connection on the front to reset the network settings to what they are supposed to be.
Does anyone have any ideas what could be causing this?