After DoubleL pointing out flashing the scanner to 4.4 we rma'ed the the scanner used a seperate L32 to flash through the backplane. Below is the knowledge base ID. There is a known anomally that seems like more of an issue with the mid-range L30 line. When we first tried to flash to 4.4 using the L30ER the card went down to 1.0. Back down the normal path after 4.4.
509535 - Product Notice 2012-10-005 - RSNetWorx for DeviceNet When Used with RSLogix 5000 V20.01 (201210005)
The purpose of this Product Notice is to inform you of a potential anomaly that exists with RSNetWorx for DeviceNet when used with RSLogix 5000 Version V20.01.
RSLogix 5000 V20.01 or specific Add-On Profiles (AOP) may result in failure of RSNetWorx for DeviceNet resulting in some devices not being able to be uploaded and / or downloaded.
TEMPORARY WORKAROUNDS:
No temporary workaround has been identified. Customers are advised to download the patch as described in the Correction section of this document.
509535 - Product Notice 2012-10-005 - RSNetWorx for DeviceNet When Used with RSLogix 5000 V20.01 (201210005)
The purpose of this Product Notice is to inform you of a potential anomaly that exists with RSNetWorx for DeviceNet when used with RSLogix 5000 Version V20.01.
RSLogix 5000 V20.01 or specific Add-On Profiles (AOP) may result in failure of RSNetWorx for DeviceNet resulting in some devices not being able to be uploaded and / or downloaded.
TEMPORARY WORKAROUNDS:
No temporary workaround has been identified. Customers are advised to download the patch as described in the Correction section of this document.