nqn827
Member
Hi,
Would someone please tell me if I could just use a coaxial cable to connect one 1794-RPA to one 1974-ACN15 modules, or do I need to use the ControlNet Coax taps with the termination between these two modules? FYI, the distance between these two modules is ~6 feet.
TIA
Would someone please tell me if I could just use a coaxial cable to connect one 1794-RPA to one 1974-ACN15 modules, or do I need to use the ControlNet Coax taps with the termination between these two modules? FYI, the distance between these two modules is ~6 feet.
TIA