ganutenator
Lifetime Supporting Member
I apologize in advance for my ignorance.
I am supposed to program a vfd for New Zealand at 50hz.
Any info would be appreciated.
That is the only info I have at this time other that in it is our standard 3 phase 3hp Toshiba drive to run a low pressure pump.
Questions resolve around what I should be concerned w/ changing from 60hz to 50hz
I am supposed to program a vfd for New Zealand at 50hz.
Any info would be appreciated.
That is the only info I have at this time other that in it is our standard 3 phase 3hp Toshiba drive to run a low pressure pump.
Questions resolve around what I should be concerned w/ changing from 60hz to 50hz