hi friends
I have a problem with flex I/O node connected with ab plc 5/40C series through R-I/O network. PLC is not reading that particular node(node 05). all inputs are aero , outputs are one though inputs available from field.
what we have tried:
changed i/o adaptor module.
swapped i/p, o/p card & i/o adaptor with other node ....... those are working fine there.
configuring node 05 with new address node 07, 08 etc. no result.
connected node 05 R-I/O network with node 06 and vise versa.... no result.
plc i/o config also showing node 05..... no fault indication any where.
Please help me.
IS THERE ANY RUN OR ACTIVE BIT TO BE SET FOR FLEX I/O IN R-I/O NETWORK.
PLEASE HELP ME.........
P.K.Mondal
I have a problem with flex I/O node connected with ab plc 5/40C series through R-I/O network. PLC is not reading that particular node(node 05). all inputs are aero , outputs are one though inputs available from field.
what we have tried:
changed i/o adaptor module.
swapped i/p, o/p card & i/o adaptor with other node ....... those are working fine there.
configuring node 05 with new address node 07, 08 etc. no result.
connected node 05 R-I/O network with node 06 and vise versa.... no result.
plc i/o config also showing node 05..... no fault indication any where.
Please help me.
IS THERE ANY RUN OR ACTIVE BIT TO BE SET FOR FLEX I/O IN R-I/O NETWORK.
PLEASE HELP ME.........
P.K.Mondal