WTFSUNELECSUP
Member
At work we need to connect one of PLC 5/40 to ethernet, I would like to do this without changing over the processor to a 5/40E, or the use of a sidecar, adaptor module etc.
So my question is, can you use the 25 pin serial port on a PLC 5/40 for ethernet connection, using a 25 pin to RJ45 adaptor and get it to communicate? If so, how.
So my question is, can you use the 25 pin serial port on a PLC 5/40 for ethernet connection, using a 25 pin to RJ45 adaptor and get it to communicate? If so, how.