makopa5
Member
Hi,
We currently have 3x PLC-5 processors which are running on Citect v7.4. We would like to migrate to WinCC but it seems that you need either a DH+ to Ethernet converter or will it be possible to run it any other way. The current AB configuration is a CLX chassis with a Ethernet card and a few DHRIO cards connecting the PLC-5's to Citect via a RSLINX ETH driver in a gateway configuration.
We currently have 3x PLC-5 processors which are running on Citect v7.4. We would like to migrate to WinCC but it seems that you need either a DH+ to Ethernet converter or will it be possible to run it any other way. The current AB configuration is a CLX chassis with a Ethernet card and a few DHRIO cards connecting the PLC-5's to Citect via a RSLINX ETH driver in a gateway configuration.