I have a PowerFlex 753 drive connected to my laptop via a 1203-USB adapter. When I connect to this with CCW and try to upload from the drive, the upload gets to the very end of the DeviceLogix part (port 14) and then comes up with an error window saying "Failed to create the DeviceLogix Editor instance". Everything else (viewing/changing parameters) seems to work fine. Someone suggested that I try to upload from the other ports only (port 0, and have an I/O card as port 4), but the option to upload from port 0 only is greyed out.
I found this similar old thread: http://www.plctalk.net/qanda/showthread.php?t=74184 but the answer posted there also does not apply to me, i.e. only one PC connected to the drive.
Any ideas? Tried all the usual: restart, run as admin, error check upload, etc.
I found this similar old thread: http://www.plctalk.net/qanda/showthread.php?t=74184 but the answer posted there also does not apply to me, i.e. only one PC connected to the drive.
Any ideas? Tried all the usual: restart, run as admin, error check upload, etc.