controlled
Lifetime Supporting Member
I have a customer that just purchased a used paper slitter/rewinder. The original owner did the initial teardown and shipped the machine to my customers. They disconnected all the wiring from two ABB drives (ACS600), but they did not send up any manuals or wiring schematics. I have searched the internet for a manual but could not find anything. I did however find a manual for and ACS800 drive. All the terminals seem to be the same. I am not on site, and I am not sure of the exact model. Does anyone know if the wiring is the same for the ACS800 and the 600. Better yet, does anyone know where I can find a manual for the 600.
Thanks
Derek
Thanks
Derek