I have an ABB ACS580 drive with an FEIP-21 communications module. It is currently configured with an IP address and I have verified communications with the Rockwell L18 controller with the proper EDS file.
Where I am falling short is the controls memory map. The drive manual is not extremely helpful unfortunately. There are a few examples given for various communication protocols, but unless I have totally missed something, there is not one defined table of data in/data out that I can reference to control the drive.
Thanks
~S~
Where I am falling short is the controls memory map. The drive manual is not extremely helpful unfortunately. There are a few examples given for various communication protocols, but unless I have totally missed something, there is not one defined table of data in/data out that I can reference to control the drive.
Thanks
~S~