frodobaggins
Member
Hi all,
I have an older system using a pktx card.
Trying to get a new system up using an ANC-120E (Virtual Network USB to DH+)
I got the network up in RSLinx just fine, I can see the PLC.
Problem is, in Fix32, after several days of searching and trying, I can never
connect to the PLC. I'm not sure the ABR driver I have will do what I want.
The Ethernet/USB to DH plus adapter looks like a ENET/DHRIO.
I'm a little out of my element here as well
I have the 6.53g ABR Driver, do I need a 7.x driver, and how do I obtain it?
Thanks,
Kevin
I have an older system using a pktx card.
Trying to get a new system up using an ANC-120E (Virtual Network USB to DH+)
I got the network up in RSLinx just fine, I can see the PLC.
Problem is, in Fix32, after several days of searching and trying, I can never
connect to the PLC. I'm not sure the ABR driver I have will do what I want.
The Ethernet/USB to DH plus adapter looks like a ENET/DHRIO.
I'm a little out of my element here as well
I have the 6.53g ABR Driver, do I need a 7.x driver, and how do I obtain it?
Thanks,
Kevin