AD HSIO Rate register

Orn Jonsson

Member
O
Join Date
Apr 2002
Location
Boise Idaho
Posts
125
Hi buds,

I am wandering if you know of a way to look at the current Pulse Rate
while doing a Trapesoid move for a Stepper using DL05. The Stepper controls work fine, I just wanted to graph the thing.
any comments appreciated

Thanks
OJ
 

Similar Topics

Pumba
HSIO configuration w/no physical wiring
Found a program with some HSIO configuration using V memory setup. The problem is that there is no physical wiring coming from the inputs being...
Replies
1
Views
1,324
bernie_carlton
bernie_carlton
R
AutomationDirect DL-06 HSIO Mode 30
Hi All, I've also posted this at the AutomationDirect forum. I'm casting for as wide an audience as possible. I am attempting to operate a...
Replies
6
Views
2,504
wolverine1981
wolverine1981
Z
Integrate between Flowmeter Promass 300 EH with AB PLC.
Dear All, Currently i'm working with Endress Hauser flowmeter and AB PLC and try to integrate with 2 items. Flow meter spec using is Promass...
Replies
6
Views
168
OkiePC
OkiePC
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
211
Steve Bailey
Steve Bailey
Dayvieboy
How to Allen Bradley get PLCs onto the corporate network without RS-Linx Gateway?
I have been looking to this and thought I'd ask for input from others before I take it in a wrong direction. The guy who used to set these up...
Replies
9
Views
441
Dayvieboy
Dayvieboy
Back
Top Bottom