diginewbee
Supporting Member
I am automating for remote control a gas supply valve. This will be done with a SCADAPACK RTU. This valve is upstream of a compressor station that wants to know status and analog inputs of my valve. Their SCADA is a GE Fanuc 90 30. I will need to add 1 DI Genius Block and 1 AI Genius Block to send status and 4-20ma from my field devices. My RTU location is about 400' from the compressor stations SCADA cabinet.
Will I need a GCM+ communications module at my RTU (along with the Genius Blocks)and send the data back to the compressor station SCADA cabinet?
Will I need a GCM+ communications module at my RTU (along with the Genius Blocks)and send the data back to the compressor station SCADA cabinet?
Last edited: