knucklebucket
Member
Good morning. This is something new to me. we have an existing controller running one of our plants. we are doing a conversion on another controller which co-exists in the same plant. the reasoning is, one (we are keeping) is Control Logix, and the other ( we are eliminating) is Siemens mostly due to proprietary reasons. here is the current situation. the controls from the Siemens is being re-programmed in the Control logix. in order to do that we are adding a 5580 Guard Logix Controller in (slot 6). so it looks like this:
1756-L2 (slot 0)
1756-EN2T Network card (slot 1)
1756-EN2T plant lan (slot 2)
1756-IB16 (slot 3)
1756-OB16 (slot 4)
1756-IF8IH (slot 5)
1756-L81ES (slot6)
1756-OB16E (slot 7)
1756- OF8 (slot 8)
1756-IF16H (slot 9)
I am not finding in the manual how to incorporate the guard Logix controller and associate the respective tags to that controller? I hope this makes sense. and any assistance would be appreciated.
1756-L2 (slot 0)
1756-EN2T Network card (slot 1)
1756-EN2T plant lan (slot 2)
1756-IB16 (slot 3)
1756-OB16 (slot 4)
1756-IF8IH (slot 5)
1756-L81ES (slot6)
1756-OB16E (slot 7)
1756- OF8 (slot 8)
1756-IF16H (slot 9)
I am not finding in the manual how to incorporate the guard Logix controller and associate the respective tags to that controller? I hope this makes sense. and any assistance would be appreciated.