mvlawn Member M Join Date Nov 2006 Location Ohio Posts 5 Feb 9, 2016 #1 I have a Click PLC and I want to take my thermocouple input and convert it to a 4 to 20 ma output. Where can I find an example or tutorial on how to get this done? I have the digital aspects of the PLC down pat but these analogs are kicking my but.
I have a Click PLC and I want to take my thermocouple input and convert it to a 4 to 20 ma output. Where can I find an example or tutorial on how to get this done? I have the digital aspects of the PLC down pat but these analogs are kicking my but.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Feb 9, 2016 #2 https://forum.automationdirect.com/showthread.php?t=6815 The above link should help you out. After setting up the analog in and out with scaling factors to the registers, you can just use a copy instruction. Regards,
https://forum.automationdirect.com/showthread.php?t=6815 The above link should help you out. After setting up the analog in and out with scaling factors to the registers, you can just use a copy instruction. Regards,