MAYOWA FEMI
Member
Good day house, I am having a problem with the analog output of GE VERSAMAX PLC. The analog output is configured to produce 4-20Ma to an I/P transducer which is to control a level valve, on the software side I can see my control variable to the output channel been varied based on the PID control. I have measured my output, but I have no 4-20ma, my analog channel has been configured to read 4-20ma. Please is there anything else I need to do. I suppose the channel is sourcing, even though I have done my wiring for both sourcing and sinking as trouble shooting.
Thanks
Thanks