I'm new to PLC, I'm using MicroLogix 1000, using USB-1761-CBL-PM02. When I try to use RSLinx Classic Lite to do the auto configuration with RS-232 DF1 Device, it shows failed to find the baud and parity! Check all cables and switch settings!
I made sure the com port is correct by checking the device manager, using SLC-CH0/Micro/PanelView. But still showing this error message. On my MicroLogix 1000, both power and fault LED light are solid. How do I fix this?
I'm using desktop windows 7 64 bit OS
I made sure the com port is correct by checking the device manager, using SLC-CH0/Micro/PanelView. But still showing this error message. On my MicroLogix 1000, both power and fault LED light are solid. How do I fix this?
I'm using desktop windows 7 64 bit OS