Automation Direct MB-Gateway with MicroMotion RFT9739

g.mccormick

Lifetime Supporting Member
G
Join Date
Jul 2012
Location
IN
Posts
961
Has anyone used an Automation Direct MB-Gateway modbus tcp to rtu gateway on a MicroMotion RFT9739 transmitter? We are able to get modbus rtu comm working to the meter using a 232 to 485 converter. We cannot seem to get the MB-Gateway to work with it. Anyone triied this setup and have success?
 

Similar Topics

R
Automation direct DL206 (d2 262 plc) and HMI EA9T6CL-R - set date and time through HMI
Hello, I have an automation direct d2 262 plc and C-more HMI EA9T6CL-R. I need to prepare a program, scheduled to be performed on a future date. I...
Replies
1
Views
157
tarik1978
T
B
peak voltage detector Automation direct 06
Hello all- I have a unique challenge using a customers Direct logic 06 PLC. This customer has a DC motor operating at 10 RPM which is turning a...
Replies
1
Views
159
drbitboy
drbitboy
M
Command over Ethernet/IP (Sysmac Studio and Automation direct GS20)
Hi, I have been trying to run drive via Sysmac studio. I can ping the drive. I can see the logic bits going on/off as per command. But, drive is...
2
Replies
21
Views
638
tarik1978
T
D
Automation Direct CM5 HMI Review
Anyone tried Automation Directs new CM5 HMI. We've been the EA9's for a few years now with minimal complaints. A few failures here and there but...
2
Replies
17
Views
1,692
Rsflipflop256
Rsflipflop256
C
Question re: need for line side contactor for an Automation Direct GS20 VFD?
I'm using an Automation Direct GS20 VFD for the first time and I have a question for the Automation Direct gurus regarding the recommendation of a...
Replies
2
Views
1,139
ControlSysNick
C
Back
Top Bottom