Hi,
I have following B&R PLCs,
CP476 and CP570 (2003 systems). B&R power panels are connected to CAN ports available on PLCs.
In case of CP476, a RS232 port is open and in case of CP570 ethernet port is available. We need to establish communication of these PLCs with our Ge-Fanuc scada ifix (Intellution).
If anybody has any experience on these PLCs, pl. help me out. Pl. suggest in case any third party OPC is required too.
Regards,
Narendra
I have following B&R PLCs,
CP476 and CP570 (2003 systems). B&R power panels are connected to CAN ports available on PLCs.
In case of CP476, a RS232 port is open and in case of CP570 ethernet port is available. We need to establish communication of these PLCs with our Ge-Fanuc scada ifix (Intellution).
If anybody has any experience on these PLCs, pl. help me out. Pl. suggest in case any third party OPC is required too.
Regards,
Narendra