Hi
I am biginner in B&R plc .
Purifier system is transmitting the data to remote display unit.
Currently there is no reading is display on remote system.
I am not having access to program.
Please advise.
Details:
I am having trouble with X20 CS1030 communication module, its TX led light is not blinking and e led is flashing.
Restart the module, e led light stop flashing but TX led is still not flashing.
Bus control module: X20 BC 0083.
Checked bus control module: SE led in green on and L/A 1F1 flashing.
The above problem started after the power shut down.
Basically bus control module receive data through RJ45 lan and then communication module CS1030 transmit the data by RS422 to other system to display the data.
Thanks
I am biginner in B&R plc .
Purifier system is transmitting the data to remote display unit.
Currently there is no reading is display on remote system.
I am not having access to program.
Please advise.
Details:
I am having trouble with X20 CS1030 communication module, its TX led light is not blinking and e led is flashing.
Restart the module, e led light stop flashing but TX led is still not flashing.
Bus control module: X20 BC 0083.
Checked bus control module: SE led in green on and L/A 1F1 flashing.
The above problem started after the power shut down.
Basically bus control module receive data through RJ45 lan and then communication module CS1030 transmit the data by RS422 to other system to display the data.
Thanks
Last edited: