Tommy Cooper
Member
I have a project for school to let 2 Beckhoff 6551 wireless data modules to communicate. Problem is one is always going out of run when I go from config mode to run mode (also when I check then with the KS2000 software he gives as channel name # although I configure the standard channel 5 as asked channel. The head module is a BC9050 for the Slave (that gives trouble). The master is a BC3150 that goes to run and when I check the parameters in ks2000 also perfectly like asked gives channel 5 as transmitting band. I have already had contact with the beckhoff support that send a link where I can find the Function blocks and even a sample programme (but even the sample doesn't run in the run mode only in config and free run).