Beijer Cimrex 91, IP address.

Elcan

Lifetime Supporting Member
Join Date
Apr 2008
Location
NC
Posts
935
Hi all,
We need to change the IP address on an old Beijer Cimrex 91 we have in the field.
I know there's a switch that you can change the position of, from 0 to 9, and that position 4 is the Configuration mode. The problem is we have not been able to find where to modify the IP address under this configuration mode.
Any hint where I can find the IP address settings?

Thank you!
 

Similar Topics

Hi. I need to get an upload from a Cimrex 30 HMI. According to a label on the back, it's made by Beijer. See attached photos. It's successfully...
Replies
5
Views
2,600
Hi all, First post here, I hope I'm putting it in the right spot! I have an ancient Beijer E910T which went down today. Given the proximity to...
Replies
0
Views
306
I am looking to upgrade a CompactLogix on V18 to an L83E on V32 which is currently using a Beijer E1151. Does anyone know if the E1151 is directly...
Replies
3
Views
645
Has anyone put together a combination of the Beijer iX Developer software and a Rexroth L54 controller over ethernet? Can't seem to get the...
Replies
2
Views
550
Hi, I'm currently having an issue with a Beijer T70 HMI. We have 2 HMIs talking to a Yaskawa motion controller via modbus over ethernet. The...
Replies
0
Views
580
Back
Top Bottom