[OSR] Using BSL instructions
When working on rslogix.pro lab (bottle line simulation). Lab exercises 1,2,3,4 worked fine. However, when putting 3 and 4 together the bit shift is been triggered twice. is this normal when using [OSR] instructions along with BSL files. example
File B3:4, control R6:1, Bit address I:1/7 length 32. used bit is [OSR] B3:4/8. when target bit is hit works fine on data table but the animation does not it drops two bottles instead of desire one.
Also noticed the [OSR] BSL file ignores ones and turns zeros to ones as they hit the B3:4/8 target while shifting at every scan. This is working opposite of expectations to my understanding.
any help will be appreciated
When working on rslogix.pro lab (bottle line simulation). Lab exercises 1,2,3,4 worked fine. However, when putting 3 and 4 together the bit shift is been triggered twice. is this normal when using [OSR] instructions along with BSL files. example
File B3:4, control R6:1, Bit address I:1/7 length 32. used bit is [OSR] B3:4/8. when target bit is hit works fine on data table but the animation does not it drops two bottles instead of desire one.
Also noticed the [OSR] BSL file ignores ones and turns zeros to ones as they hit the B3:4/8 target while shifting at every scan. This is working opposite of expectations to my understanding.
any help will be appreciated
Last edited: