mjisaacs
Member
I am looking at removing a UNIop MD03R-04 interface that is used to insert a setpoint for length into a MoviDrive MDX60A-00 from the PLC port of the HMI. I am adding a Click PLC to automate some other stuff on the machine, and need to "talk" to the PLC and the MoviDrive. Can I do this with a C-More? I have used them many times, but I do not know which protocol, if any, I need to use for the drive's EXISTING programming. I have used a C-More to a PLC and a drive before, but I knew what I needed to do before I wrote the program. Any ideas? I am open to other HMIs if this one will not do it.