CCU communication with mitsubishi

sttchui

Member
S
Join Date
Mar 2008
Location
kl
Posts
81
Hi,
Anyone have try to used CCU communication between Keyence touch screen VT-7S to Mitsubishi Q02HCPU??
I have check the Keyence can only have CCU communication with Q series(Q mode). How is the wiring is configure or any manual can help me!
Thank you!
Regard
sttchui
 

Similar Topics

T
TotalFlow RMC, assigning descriptors to I/O points using PCCU?
I can't seem to figure out how to add descriptors to I/O points on an RMC using PCCU. Say, for example, I want to use "Valve_1" as a descriptor...
Replies
0
Views
81
timothy585
T
T
TotalFlow G4 reset to factory default w/o PCCU connection?
I've got a G4(board only)with a MMI port problem. I do not know the IP, but I believe that port works. Is there a way to reset the device to...
Replies
1
Views
584
parky
P
jawolthuis
Need Accu Sort 24i manual and/or software
I have several Accu Sort 24i scanners and was hoping to implement them in a project. But I have not been able to find a manual for the serial pin...
2
Replies
16
Views
6,318
jawolthuis
jawolthuis
G
Simatic Accu
Hi, Can someone provide some information about the ACCU of SIMATIC. I have a list with the bits from the ACCU but I can't find what they...
Replies
4
Views
4,832
gery
G
C
SLC 5/03 Communication / Processor Issue
Hello All! I am writing today because I cannot figure this out for the life of me. Another site I am affiliated with keeps having their slc 5/03s...
Replies
10
Views
185
geniusintraining
geniusintraining
Back
Top Bottom