Alright. I'm no PLC programmer and I have no knowledge whatever on PLC programming.
A while ago I made a post about how to make a normal flip flop function. You guys were great. You helped without any noob stuff thrown to my head. REally liked it and thanks again.
Now, you guessed it. I have another problem. I'm using a PLC5/20 to run my home automation. So I use it at home to do all kind of cool stuff. I'm learning this so bare with me ;-)
What I need it the following. I want my central heating boiler to run every 4 hours for 1 hour. I've been messing around with timers and stuff but I can't seem to figure it out.
Any of you guys can give me a hint. Not to complicated because i'm a noob.
So what I need it after 4 hours my central heating system should switch on and run for 1 hour. Then we should wait again for another 4 hours and then again he should we switched on for 1 hour. etc.....
I'm using a normal "energized output" to control a relais which will switch on the power to the heating system. So I need to control that output.
mmmmm I'm dying to see what you guys have in mind.
Thanks in advance
Bist
A while ago I made a post about how to make a normal flip flop function. You guys were great. You helped without any noob stuff thrown to my head. REally liked it and thanks again.
Now, you guessed it. I have another problem. I'm using a PLC5/20 to run my home automation. So I use it at home to do all kind of cool stuff. I'm learning this so bare with me ;-)
What I need it the following. I want my central heating boiler to run every 4 hours for 1 hour. I've been messing around with timers and stuff but I can't seem to figure it out.
Any of you guys can give me a hint. Not to complicated because i'm a noob.
So what I need it after 4 hours my central heating system should switch on and run for 1 hour. Then we should wait again for another 4 hours and then again he should we switched on for 1 hour. etc.....
I'm using a normal "energized output" to control a relais which will switch on the power to the heating system. So I need to control that output.
mmmmm I'm dying to see what you guys have in mind.
Thanks in advance
Bist