shailesh_vb
Member
Hello everyone,
I have doubt regarding ports of Micrologix 1400 PLC.
Channel 0 and Channel 2...
Channel 0 is Rs232C or RS485 or can be configured as both?
Same for Channel 2..
Because I did Modbus RTU Slave on Channel 0 and checked it with Modscan software. And used no RS485 to RS232 converter in between PLC and PC.
Thanks,
Shailesh.
I have doubt regarding ports of Micrologix 1400 PLC.
Channel 0 and Channel 2...
Channel 0 is Rs232C or RS485 or can be configured as both?
Same for Channel 2..
Because I did Modbus RTU Slave on Channel 0 and checked it with Modscan software. And used no RS485 to RS232 converter in between PLC and PC.
Thanks,
Shailesh.