Hello all,
I am unable to read any tags or even the $SYS$ tags from my CLX 1756-L62 (v20.13) controller through Archestra IDE.
The Object Viewer states the quality is BAD or Initializing for any attempt to scan an attribute, see attached "Object Viewer tag" picture.
I have also attached my DASABCIP settings inside SMC, files "SMC" and "PLC parameters", I have set the the Host Name to match the IP of my ENBT card to be 192.168.2.201. Please see attached the RSLogix screenshot "RSLogix".
I address the tags with the following: "Comms_Link.Topic_0.tester_1" or "Comms_Link.Topic_0_$SYS$Status" where "Comms_Link" is my DDESuiteLinkClient object in Archestra IDE.
I have read through all the documentation and cannot find what I have incorrect, I am now thinking of changing the firmware on the CPU. I am tearing my hair out, please help.
I am unable to read any tags or even the $SYS$ tags from my CLX 1756-L62 (v20.13) controller through Archestra IDE.
The Object Viewer states the quality is BAD or Initializing for any attempt to scan an attribute, see attached "Object Viewer tag" picture.
I have also attached my DASABCIP settings inside SMC, files "SMC" and "PLC parameters", I have set the the Host Name to match the IP of my ENBT card to be 192.168.2.201. Please see attached the RSLogix screenshot "RSLogix".
I address the tags with the following: "Comms_Link.Topic_0.tester_1" or "Comms_Link.Topic_0_$SYS$Status" where "Comms_Link" is my DDESuiteLinkClient object in Archestra IDE.
I have read through all the documentation and cannot find what I have incorrect, I am now thinking of changing the firmware on the CPU. I am tearing my hair out, please help.