AlfredoQuintero
Lifetime Supporting Member
Hello. I cannot change the SendClock settings for a PROFINET IO device. I need to slow down the CODESYS PROFINET IO controller.
What am I doing wrong here?
What am I doing wrong here?
CODESYS Profinet Master, cannot change SendClock settings
- Thread starter AlfredoQuintero
- Start date
Similar Topics
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
Hello CODESYS experts, once again I need help.
Trying to setup a PROFINET device which supports shared device function, has four (4) IO modules (2...
Hello,
I am using a Hitachi Micro EHV+ for a small project, and I wanted to have a Web visu, done with Codesys V3.5 SP13 Patch 2.
I test the...
Hello,
I have a requirement to manage the text alignment dynamically.
So, for example:
1. English Texts should be displayed from Left in...
Hello,
I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...