set-csg
Member
Hi everybody, I am very new to this forum. I would to develop a combinational lock system, a program using PLC to open a lock with 2 or 3 digit combination and another digit used as ENTER to implement the combination.
I want the program to be generic so that everytime I change the combination all I have to do is to change the value in the status chart.
Q0.0 is the output for correct combination
Q0.1 is the output for the alarm for wrong combination entered.
Pls help me in this problem. If possible program it using S7-200.
TNX,
CSG
I want the program to be generic so that everytime I change the combination all I have to do is to change the value in the status chart.
Q0.0 is the output for correct combination
Q0.1 is the output for the alarm for wrong combination entered.
Pls help me in this problem. If possible program it using S7-200.
TNX,
CSG