Scott180zip
Member
Setting up a PanelView-550 to communicate with Compact Logix, using a laptop to set it up. DF1 using USB<> RS232 converter using a BELKIN, continual COM problem. PV will not consistently respond using Autoconfigure using RSLinx Classic. Anyone have any suggestions, sometimes it works - sometimes not but it always crashes. This time I cannot even get it to start. Very unstable. 19200 Baud, 8 bits/ 1 stop no handshaking, BRB. Using A/B cable but need to use a NULL Modem. I gave up on the Laptop communications and connected it hooked to Compact Logix processor RS-485 Port which will not recognize it either.
Note: using PV32 Software
Note: using PV32 Software