Conrad Black
Member
Hi folks,
i want to link my micrologix 1000 to a dh485 network. On that network, there is panel view 1000 and slc 503. slc and pv pass trough a 1747-aic to communicate.
slc503 to 1747-aic to 1747-aic to panelview 1000.
Now, i want to put a 1761-net-aic on that setup. I connected that net-aic with port 3 to the slc but DATA LINK error appeared on the panelview.
I checked termination connector... seem correct.
the SLC can be in the midle of the network or must at one of the end terminal.
i want to link my micrologix 1000 to a dh485 network. On that network, there is panel view 1000 and slc 503. slc and pv pass trough a 1747-aic to communicate.
slc503 to 1747-aic to 1747-aic to panelview 1000.
Now, i want to put a 1761-net-aic on that setup. I connected that net-aic with port 3 to the slc but DATA LINK error appeared on the panelview.
I checked termination connector... seem correct.
the SLC can be in the midle of the network or must at one of the end terminal.